LOON Typhoon 2.0/Pods

For a basic video tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Blue Indicator	100-70%
Green Indicator	70-40%
Red Indicator	40% or less
(While Charging)	Green: 50% or less Blue: 50-100% Off: Fully charged

For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Your device includes a USB-C cable in the box. Use it with a USB port on a computer or wall block, and plug the cord into your device to charge it. The indicator light towards the middle of the device near the Typhoon 2.0 logo will light up. The color of the light indicates the percentage of the battery while charging (Green=0-50%, Blue=50-100%). When the device is fully charged, the light will turn off. For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Open the small rubber fill port located on the side of your Typhoon 2.0 Pod. Insert the tip of your favorite bottle of salt nicotine juice (LOON Salts or Juice work best!) and gently squeeze. When the pod is nearly full (overfilling can cause leakage or a flooded coil), remove the bottle and close the rubber cap. Set the pod into the magnetized battery port, and enjoy. Please note that the 0.8ohm Typhoon pods are only designed to be used with salt-based juices. If you would like to use freebase nicotine juice in your device, try our new 0.6ohm pods, compatible with both salt and freebase juices. Click here for a link to purchase both types. If you are having trouble finding where to choose between pod types, please refer to the image below.

For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

For the best flavor and vapor production, we recommend switching to a fresh LOON Typhoon pod after 5 fills. For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

You should use LOON Typhoon 2.0 Pods in your LOON Typhoon 2.0. Click here for a link to purchase them. Please note that the 0.8ohm Typhoon pods are only designed to be used with salt-based juices. If you would like to use freebase nicotine juice in your device, try our new 0.6ohm pods, compatible with both salt and freebase juices. Click here for a link to purchase both types. If you are having trouble finding where to choose between pod types, please refer to the image below.

For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Check to ensure that the pod is filled with juice, and make sure the airflow hole is not obstructed by your finger(s) when using the device. If the problem persists, it's time to change your LOON Typhoon 2.0 Pod. Click here for a link to purchase more. Please note that the 0.8ohm Typhoon pods are only designed to be used with salt-based juices. If you would like to use freebase nicotine juice in your device, try our new 0.6ohm pods, compatible with both salt and freebase juices. If you are having trouble finding where to choose between pod types, please refer to the image below.

For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Move the small metal slider located on the center of the device (opposite side of the Typhoon 2.0 logo) to the left or right to adjust your device's airflow as desired. If the metal circle is on the left, the airflow hole is fully opened. If the metal circle is on the right, the airflow hole is fully closed. Please note that using your device with the airflow fully closed will shorten the life of your Typhoon 2.0 pods. To avoid this, simply nudge the slider slightly to the left to allow a small amount of air into the device. For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Try plugging your USB cord into a different wall block, or your wall block into a different electrical outlet. Also ensure that the device is plugged directly into the wall and not into a power strip. For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

LOON Typhoon 2.0 always tastes best with LOON Salts or Juice, but you can use any salt nicotine based e-liquid in your device. Please note that using overly sweetened or poorly mixed juices can affect the lifespan of your Typhoon Pods. Please note that the 0.8ohm Typhoon pods are only designed to be used with salt-based juices. If you would like to use freebase nicotine juice in your device, try our new 0.6ohm pods, compatible with both salt and freebase juices. Click here for a link to purchase both types. If you are having trouble finding where to choose between pod types, please refer to the image below.

For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.

Make sure that your device is charged (the light will blink red 10 times if the battery power is too low to operate the device). Also, make sure the airflow hole is not obstructed by your fingers when using the device. For a basic tutorial on getting started with your LOON Typhoon 2.0 device, click here. For an online version of the instruction manual included with the device, click here.